11 Steps to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair

You may be surprised to see just how you can spray on auto paint actually can be easy. That does not mean that you go at it and can simply grab a tin of paint. There are some principles you need to understand. Both in application and the preparation.

Step A:

Prepare by assembling all your items that you're going to need. Be sure your surrounding area is protected against any potential over aerosol. Any parts that do not need to be sprayed and that can be removed subsequently do so.

Step B:

You may have to analyze the car for any rough spots. This will smooth out the rough spots. In addition, it allows the spray automobile paint to adhere better. Once you've finished sanding, make certain all the dust dirt and debris are removed from the vehicle. It's imperative that the auto be absolutely clean.

Measure C:

This will make sure that you get an overall even coat of your coloured paint plus helps the paint to adhere nicely. When you spray the primer, ensure you allow for drying in between and apply light layers. The best way to spray on car paint takes a little getting used to.

Step D:

Now you are well to the point at which you are around ready to spray the colour. In either case, make a couple of practice strokes on an item before you start with the car. Start the passes with the paint without reluctance, after you happen to be ready. If you hold gun or the spray can in one spot, you will get uneven coverage and potentially the paint will run. Should this happen you've got a major repair job on your had. You will most likely have directions as to how exactly to spray auto paint using the spray or gear cans.

Step E:

Check with someone which is familiar with how to spray on auto paint, or you may want to Alloy Wheel Repair Billericay study this option on the web

Step F:

Once you're completely satisfied with the color, you're down to the finishing touches. You'll now want to apply several coats that are clear. This will give the gloss and finished appearance to the auto together with protect the finish. Probably two coatings will be satisfactory but it will be up to you personally. Make absolutely certain it truly is dry in between coats.

Step G:

If you prefer once again, you have the choice of wet sanding. Again, it is suggested you ask the guidance of individuals which can be familiar with how to spray paint an automobile. If you determine to follow this step then you need with the following grits in this arrangement. This will remove spots that could be too heavy in the clear coat application.

Step H:

Step I:



You should buff the surface. To try this simply use a medium cut polish.

Step J:

As a final touch, you might want to apply several coats of wax.

Write a comment

Comments: 0